| Reload Frameset | Home | German Pages |
Variation Effect:
All available settings of the 42 variation effect types!
Contents:
- Introduction
- Tables of Variation effect settings:
1. Common settings for all variation effect types
2. Hall 1,2, Room 1,2,3, Stage 1,2 and Plate
3. Delay L,C,R (Default Variation effect)
4. Delay L,R
5. Echo
6. Cross Delay
7. Early Reflections 1,2
8. Gate Reverb and Reverse Gate
9. Karaoke 1,2,3
10. Chorus 1,2,3,4 and Celeste 1,2,3,4
11. Flanger 1,2,3
12. Symphonic
13. Rotary Speaker
14. Tremolo
15. Auto Pan
16. Phaser 1,2
17. Distortion and Overdrive
18. Amp Simulator
19. 3-Band EQ (Mono)
20. 2-Band EQ (Stereo)
21. Auto Wah or Pedal Wah
Introduction
The following tables contain all available settings for the 42 different variation effect types. The first table contains the common effect parameters for all variation effect types. The other tables contain the available settings of single effects or effect groups with common effect parameters. On the top of each of these tables you'll find the messages to enable the different effect types, below you'll find all adjustable effect parameters.The Variation parameters 1-10 (F0,43,10,4C,02,01,40,YY,XX,F7 - F0,43,10,4C,02,01,54,YY,XX,F7) are required by the XG specification and should be provided by any XG synth.
The Variation parameters 11-16 (F0,43,10,4C,02,01,70,XX,F7 - F0,43,10,4C,02,01,75,XX,F7) are optional and not required by the XG specification - therefore those parameters appear in grey colour and are marked with 'Optional'. These parameters are provided by the Yamaha MU series (MU 10, 50, 80, 90, 100) and the Yamaha sound cards DB50XG, SW60XG and SW1000XG, but not all XG synths provide them.
Important:
You have to enable the system mode if you want to use the variation effect with several different Parts simultaneously. By XG default the variation effect is in insertion mode and not assigned to any of the 16 Parts - this means, that the variation effect is disabled by default!
If you want to use the variation effect in insertion mode, you have to assign a Part to the variation effect - in this case the variation effect will be available only for the assigned Part. In insertion mode most effect types have one parameter (mentioned in the tables), which can be controlled via MW, BEND, CAT, AC1 or AC2. Like this you could change the speed of the 'Rotary Speaker' or use 'Auto Wah' as a 'Pedal Wah' in realtime. You have to enable the 'Control Depth' for the controller of your choice, if you want to use this feature. By XG default all of these controllers are disabled (value=40h). The control numbers for AC1 and AC2 correspond to the settings for AC1 and AC2 of the assigned Part.
The Yamaha SW60XG (the MU10 too as I know) provides two additional variation effect types: Pitch Shift and Voice Cancel.
The available effect settings for these two effects you can find at my page SW60XG Special.
The Yamaha synths MU80, MU90, MU100 und SW1000XG also provide several additional variation effect types, which don't appear at this page. Perhaps I'll add information to those effect types in future.
Effect parameters are 'Non realtime messages' - changing them during processing any effect will cause unexpected sound results. You should change these settings only at the beginning of a song or during a break of at least 0.5 seconds, when no sound is created by the Variation effect. Only the already mentioned parameter, which can be controlled by AC1 etc. can be changed during playback.
You can paste the SyEx strings directly from this page into your sequencer program, but you'll need to replace the variables XX or YY,XX with valid hexadecimal values. In column 'Data Range' you can find the valid data range for each parameter. For some effect parameters (for example EQ frequency, reverb time, delay time, LFO frequency...) reference tables are available - such parameters can be adjusted accurately. The links in the right column will lead you directly to the referring table of my page Reference Tables.
At Chapter 11 of my page 'Reference Tables' I've described how to calculate the values for those effect parameters which need two MIDI bytes (YY,XX) for data entry.
Back to the top
1. Common settings for all variation effect types
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Default Value | |
| F0,43,10,4C,02,01,56,XX,F7 | 00h - 7Fh (0d - 127d) |
VARIATION RETURN (Send to master) |
0...64...127: -inf...0...+6 (dB) |
40h (64d) | |
| F0,43,10,4C,02,01,57,XX,F7 | 01h - 7Fh (1d - 127d) |
VARIATION PANORAMA | 1...64...127: Left...Center...Right |
40h (64d) | |
| F0,43,10,4C,02,01,58,XX,F7 | 00h - 7Fh (0d - 127d) |
SEND VARIATION TO REVERB | 0...64...127: -inf...0...+6 (dB) |
00h (0d) | |
| F0,43,10,4C,02,01,59,XX,F7 | 00h - 7Fh (0d - 127d) |
SEND VARIATION TO CHORUS | 0...64...127: -inf...0...+6 (dB) |
00h (0d) | |
| F0,43,10,4C,02,01,5A,XX,F7 | 00h - 01h (0d - 1d) |
VARIATION CONNECTION | 0: insertion, 1: SYSTEM |
00h (0d) | |
| F0,43,10,4C,02,01,5B,XX,F7 | 00h - 0Fh, 40h, 41h, 7Fh (0d - 15d, 64d, 65d, 127d) |
VARIATION PART (Only available in insertion mode; A/D Parts are available only with some XG synths like the SW60XG) |
0 - 15: Part 1 - 16, 64: A/D Part 1, 65: A/D Part 2, 127: OFF |
7Fh (127d) | |
| F0,43,10,4C,02,01,5C,XX,F7 | 00h - 7Fh (0d - 127d) |
MODULATION WHEEL (MW) VARIATION CONTROL DEPTH (Only available in insertion mode) |
0...64...127: -64...0...+63 |
40h (64d) | |
| F0,43,10,4C,02,01,5D,XX,F7 | 00h - 7Fh (0d - 127d) |
BEND WHEEL (BEND) VARIATION CONTROL DEPTH (Only available in insertion mode) |
0...64...127: -64...0...+63 |
40h (64d) | |
| F0,43,10,4C,02,01,5E,XX,F7 | 00h - 7Fh (0d - 127d) |
CHANNEL AFTER TOUCH (CAT) VARIATION CONTROL DEPTH (Only available in insertion mode) |
0...64...127: -64...0...+63 |
40h (64d) | |
| F0,43,10,4C,02,01,5F,XX,F7 | 00h - 7Fh (0d - 127d) |
ASSIGNABLE CONTROLLER 1 (AC1) VARIATION CONTROL DEPTH (Only available in insertion mode; the controller number for AC1 depends on the AC1 settings of the assigned Part) |
0...64...127: -64...0...+63 |
40h (64d) | |
| F0,43,10,4C,02,01,60,XX,F7 | 00h - 7Fh (0d - 127d) |
ASSIGNABLE CONTROLLER 2 (AC2) VARIATION CONTROL DEPTH (Only available in insertion mode; the controller number for AC2 depends on the AC2 settings of the assigned Part |
0...64...127: -64...0...+63 |
40h (64d) | |
| F0,43,10,4C,02,01,40,00,00,F7 | EFFECT TURNED OFF | Switches the Variation effect off | |||
| F0,43,10,4C,02,01,40,40,00,F7 | EFFECT THRU | Bypass without applying an effect | |||
2. Hall 1,2, Room 1,2,3, Stage 1,2 and Plate
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,01,00,F7 F0,43,10,4C,02,01,40,01,01,F7 F0,43,10,4C,02,01,40,02,00,F7 F0,43,10,4C,02,01,40,02,01,F7 F0,43,10,4C,02,01,40,02,02,F7 F0,43,10,4C,02,01,40,03,00,F7 F0,43,10,4C,02,01,40,03,01,F7 F0,43,10,4C,02,01,40,04,00,F7 |
EFFECT TYPE |
01h 00h: HALL 1 01h 01h: HALL 2 02h 00h: ROOM 1 02h 01h: ROOM 2 02h 02h: ROOM 3 03h 00h: STAGE 1 03h 01h: STAGE 2 04h 00h: PLATE |
HALL 1, 2 are reverbs simulating the resonance of a hall. ROOM 1, 2, 3 are reverbs simulating the resonance of a room. STAGE 1, 2 are reverbs appropriate for a solo instrument. PLATE is a reverb simulating a metal plate reverb unit. |
|
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 45h (0d - 69d) |
REVERB TIME | 0.3 - 30.0 (s) | view: Table 4 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 0Ah (0d - 10d) |
DIFFUSION | 0 - 10 | |
| F0,43,10,4C,02,01,46,00,XX,F7 | 00h - 3Fh (0d - 63d) |
INITIAL DELAY | 0.1 - 99.3 (ms) | view: Table 5 |
| F0,43,10,4C,02,01,48,00,XX,F7 | 00h - 34h (0d - 52d) |
HPF CUTOFF | 20 - 8,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4A,00,XX,F7 | 22h - 3Ch (34d - 60d) |
LPF CUTOFF | 1,000 - 20,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,70,XX,F7 | 00h - 3Fh (0d - 63d) |
REVERB DELAY(Optional) | 0.1 - 99.3 (ms) | view: Table 5 |
| F0,43,10,4C,02,01,71,XX,F7 | 00h - 03h (0d - 3d) |
DENSITY (Optional) |
0 - 3 | |
| F0,43,10,4C,02,01,72,XX,F7 | 01h - 7Fh (1d - 127d) |
EARLY REFLECTIONS REVERB BALANCE (Optional) |
1...64...127: ER(only)...ER=REV...REV(only) |
|
| F0,43,10,4C,02,01,74,XX,F7 | 01h - 7Fh (1d - 127d) |
FEEDBACK LEVEL (Optional) |
1...64...127: -63...0...+63 |
|
3. Delay L,C,R (Default Variation Effect)
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,05,00,F7 |
EFFECT TYPE | 05h 00h: DELAY L,C,R | A program that creates three delay sounds: L, R and C (center). | |
| F0,43,10,4C,02,01,42,YY,XX,F7 | 00h,01h - 37h,6Eh (1d - 7150d) |
LEFT CHANNEL DELAY | 1 - 7150: 0.1 - 715.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,44,YY,XX,F7 | 00h,01h - 37h,6Eh (1d - 7150d) |
RIGHT CHANNEL DELAY | 1 - 7150: 0.1 - 715.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,46,YY,XX,F7 | 00h,01h - 37h,6Eh (1d - 7150d) |
CENTER CHANNEL DELAY | 1 - 7150: 0.1 - 715.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,48,YY,XX,F7 | 00h,01h - 37h,6Eh (1d - 7150d) |
FEEDBACK DELAY | 1 - 7150: 0.1 - 715.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,4A,00,XX,F7 | 01h - 7Fh (1d - 127d) |
FEEDBACK LEVEL | 1...64...127: -63...0...+63 |
|
| F0,43,10,4C,02,01,4C,00,XX,F7 | 00h - 7Fh (0d - 127d) |
CENTER CHANNEL LEVEL | 0 - 127 | |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 01h - 0Ah (1d - 10d) |
HIGH DAMP | 1 -10: 0.1 -1.0 |
|
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,72,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY (Optional) |
50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,73,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN (Optional) |
52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,74,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY (Optional) |
500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,75,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN (Optional) |
52...64...76: -12...0...+12 (dB) |
|
4. Delay L,R
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,06,00,F7 |
EFFECT TYPE | 06h 00h: DELAY L,R | A programm that creates two delay sounds: L and R. Two feedback delays are provided. | |
| F0,43,10,4C,02,01,42,YY,XX,F7 | 00h,01h - 37h,6Eh (1d - 7150d) |
LEFT CHANNEL DELAY | 1 - 7150: 0.1 - 715.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,44,YY,XX,F7 | 00h,01h - 37h,6Eh (1d - 7150d) |
RIGHT CHANNEL DELAY | 1 - 7150: 0.1 - 715.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,46,YY,XX,F7 | 00h,01h - 37h,6Eh (1d - 7150d) |
FEEDBACK DELAY 1 | 1 - 7150: 0.1 - 715.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,48,YY,XX,F7 | 00h,01h - 37h,6Eh (1d - 7150d) |
FEEDBACK DELAY 2 | 1 - 7150: 0.1 - 715.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,4A,00,XX,F7 | 01h - 7Fh (1d - 127d) |
FEEDBACK LEVEL | 1...64...127: -63...0...+63 |
|
| F0,43,10,4C,02,01,4C,00,XX,F7 | 01h - 0Ah (1d - 10d) |
HIGH DAMP | 1 -10: 0.1 -1.0 |
|
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,72,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY (Optional) |
50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,73,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN (Optional) |
52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,74,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY (Optional) |
500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,75,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN (Optional) |
52...64...76: -12...0...+12 (dB) |
|
5. Echo
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,07,00,F7 |
EFFECT TYPE | 07h 00h: ECHO | Two delays (L and R) and independend feedback delays for L and R. | |
| F0,43,10,4C,02,01,42,YY,XX,F7 | 00h,01h - 1Bh,5Eh (1d - 3550d) |
LEFT CHANNEL DELAY 1 | 1 - 3550: 0.1 - 355.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 01h - 7Fh (1d - 127d) |
LEFT CHANNEL FEEDBACK LEVEL |
1...64...127: -63...0...+63 |
|
| F0,43,10,4C,02,01,46,YY,XX,F7 | 00h,01h - 1Bh,5Eh (1d - 3550d) |
RIGHT CHANNEL DELAY 1 | 1 - 3550: 0.1 - 355.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,48,00,XX,F7 | 01h - 7Fh (1d - 127d) |
RIGHT CHANNEL FEEDBACK LEVEL |
1...64...127: -63...0...+63 |
|
| F0,43,10,4C,02,01,4A,00,XX,F7 | 01h - 0Ah (1d - 10d) |
HIGH DAMP | 1 -10: 0.1 -1.0 |
|
| F0,43,10,4C,02,01,4C,YY,XX,F7 | 00h,01h - 1Bh,5Eh (1d - 3550d) |
LEFT CHANNEL DELAY 2 | 1 - 3550: 0.1 - 355.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,4E,YY,XX,F7 | 00h,01h - 1Bh,5Eh (1d - 3550d) |
RIGHT CHANNEL DELAY 2 | 1 - 3550: 0.1 - 355.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,50,00,XX,F7 | 00h - 7Fh (0d - 127d) |
DELAY 2 LEVEL | 0 - 127 | |
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,72,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY (Optional) |
50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,73,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN (Optional) |
52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,74,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY (Optional) |
500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,75,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN (Optional) |
52...64...76: -12...0...+12 (dB) |
|
6. Cross Delay
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,08,00,F7 |
EFFECT TYPE | 08h 00h: CROSS DELAY | A programm that crosses the feedback of two delays. | |
| F0,43,10,4C,02,01,42,YY,XX,F7 | 00h,01h - 1Bh,5Eh (1d - 3550d) |
L -> R DELAY | 1 - 3550: 0.1 - 355.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,44,YY,XX,F7 | 00h,01h - 1Bh,5Eh (1d - 3550d) |
R -> L DELAY | 1 - 3550: 0.1 - 355.0 (ms) |
view: Chapter 11 |
| F0,43,10,4C,02,01,46,00,XX,F7 | 01h - 7Fh (1d - 127d) |
FEEDBACK LEVEL | 1...64...127: -63...0...+63 |
|
| F0,43,10,4C,02,01,48,00,XX,F7 | 00h - 02h (0d - 2d) |
INPUT SELECT | O: Left, 1: Right, 2: Left+Right |
|
| F0,43,10,4C,02,01,4A,00,XX,F7 | 01h - 0Ah (1d - 10d) |
HIGH DAMP | 1 -10: 0.1 -1.0 |
|
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,72,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY (Optional) |
50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,73,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN (Optional) |
52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,74,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY (Optional) |
500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,75,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN (Optional) |
52...64...76: -12...0...+12 (dB) |
|
7. Early Reflections 1,2
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,09,00,F7 F0,43,10,4C,02,01,40,09,01,F7 |
EFFECT TYPE | 09h 00h: EARLY REFLECTIONS 1 09h 01h: EARLY REFLECTIONS 2 |
This two effects produce only the early reflection component of reverb. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 05h (0d - 5d) |
TYPE | 0: S-H, 1: L-H, 2: Rdm, 3: Rvs, 4: Plt, 5: Spr |
|
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 2Ch (0d - 44d) |
ROOM SIZE | 0.1 - 7.0 (m) | view: Table 6 |
| F0,43,10,4C,02,01,46,00,XX,F7 | 00h - 0Ah (0d - 10d) |
DIFFUSION | 0 - 10 | |
| F0,43,10,4C,02,01,48,00,XX,F7 | 00h - 3Fh (0d - 63d) |
INITIAL DELAY | 0.1 - 99.3 (ms) | view: Table 5 |
| F0,43,10,4C,02,01,4A,00,XX,F7 | 01h - 7Fh (1d - 127d) |
FEEDBACK LEVEL | 1...64...127: -63...0...+63 |
|
| F0,43,10,4C,02,01,4C,00,XX,F7 | 00h - 34h (0d - 52d) |
HPF CUTOFF | 20 - 8,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 22h - 3Ch (34d - 60d) |
LPF CUTOFF | 1,000 - 20,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,70,XX,F7 | 00h - 0Ah (0d - 10d) |
LIVENESS (Optional) |
0 - 10 | |
| F0,43,10,4C,02,01,71,XX,F7 | 00h - 03h (0d - 3d) |
DENSITY (Optional) |
0 - 3 | |
| F0,43,10,4C,02,01,72,XX,F7 | 01h - 0Ah (1d - 10d) |
HIGH DAMP (Optional) |
1 -10: 0.1 -1.0 |
|
8. Gate Reverb and Reverse Gate
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,0A,00,F7 F0,43,10,4C,02,01,40,0B,00,F7 |
EFFECT TYPE | 0Ah 00h: GATE REVERB 0Bh 00h: REVERSE GATE |
GATE REVERB is a simulation of a gated reverb. REVERSE GATE is a program that simulates gated reverb played backwards. |
|
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 01h (0d - 1d) |
TYPE | 0: Type A, 1: Type B |
|
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 2Ch (0d - 44d) |
ROOM SIZE | 0.1 - 7.0 (m) | view: Table 6 |
| F0,43,10,4C,02,01,46,00,XX,F7 | 00h - 0Ah (0d - 10d) |
DIFFUSION | 0 - 10 | |
| F0,43,10,4C,02,01,48,00,XX,F7 | 00h - 3Fh (0d - 63d) |
INITIAL DELAY | 0.1 - 99.3 (ms) | view: Table 5 |
| F0,43,10,4C,02,01,4A,00,XX,F7 | 01h - 7Fh (1d - 127d) |
FEEDBACK LEVEL | 1...64...127: -63...0...+63 |
|
| F0,43,10,4C,02,01,4C,00,XX,F7 | 00h - 34h (0d - 52d) |
HPF CUTOFF | 20 - 8,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 22h - 3Ch (34d - 60d) |
LPF CUTOFF | 1,000 - 20,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,70,XX,F7 | 00h - 0Ah (0d - 10d) |
LIVENESS (Optional) |
0 - 10 | |
| F0,43,10,4C,02,01,71,XX,F7 | 00h - 03h (0d - 3d) |
DENSITY (Optional) |
0 - 3 | |
| F0,43,10,4C,02,01,72,XX,F7 | 01h - 0Ah (1d - 10d) |
HIGH DAMP (Optional) |
1 -10: 0.1 -1.0 |
|
9. Karaoke 1,2,3
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,14,00,F7 F0,43,10,4C,02,01,40,14,01,F7 F0,43,10,4C,02,01,40,14,02,F7 |
EFFECT TYPE | 14h 00h: KARAOKE 1 14h 01h: KARAOKE 2 14h 02h: KARAOKE 3 |
Three delays with feedback of the same type as used for karaoke reverb. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 7Fh (0d - 127d) |
DELAY TIME | 0.1 - 400.0 (ms) | view: Table 7 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 01h - 7Fh (1d - 127d) |
FEEDBACK LEVEL | 1...64...127: -63...0...+63 |
|
| F0,43,10,4C,02,01,46,00,XX,F7 | 00h - 34h (0d - 52d) |
HPF CUTOFF | 20 - 8,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,48,00,XX,F7 | 22h - 3Ch (34d - 60d) |
LPF CUTOFF | 1,000 - 20,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
10. Chorus 1,2,3,4 and Celeste 1,2,3,4
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,41,00,F7 F0,43,10,4C,02,01,40,41,01,F7 F0,43,10,4C,02,01,40,41,02,F7 F0,43,10,4C,02,01,40,41,08,F7 F0,43,10,4C,02,01,40,42,00,F7 F0,43,10,4C,02,01,40,42,01,F7 F0,43,10,4C,02,01,40,42,02,F7 F0,43,10,4C,02,01,40,42,08,F7 |
EFFECT TYPE |
41h 00h: CHORUS 1 41h 01h: CHORUS 2 41h 02h: CHORUS 3 41h 08h: CHORUS 4 42h 00h: CELESTE 1 42h 01h: CELESTE 2 42h 02h: CELESTE 3 42h 08h: CELESTE 4 |
CHORUS 1, 2, 3 and 4 are conventional chorus programs that add natural spaciousness.
CHORUS 4 has a stereo input - therefore the pan setting specified for the Part will
also apply to the effect sound. CELESTE 1, 2, 3 and 4 add via a 3-phase LFO modulation and spaciousness to the sound. CELESTE 4 has a stereo input - therefore the pan setting specified for the Part will also apply to the effect sound. |
|
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO FREQUENCY | 0.0 - 39.7 (Hz) | view: Table 1 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO PITCH MODULATION DEPTH |
0 - 127 | |
| F0,43,10,4C,02,01,46,00,XX,F7 | 01h - 7Fh (1d - 127d) |
FEEDBACK LEVEL | 1...64...127: -63...0...+63 |
|
| F0,43,10,4C,02,01,48,00,XX,F7 | 00h - 7Fh (0d - 127d) |
DELAY OFFSET | 0.0 - 50.0 (ms) | view: Table 2 |
| F0,43,10,4C,02,01,4C,00,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY | 50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,50,00,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY | 500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,52,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,74,XX,F7 | 00h - 01h (0d - 1d) |
INPUT MODE (Optional) |
0: MONO 1: STEREO |
|
11. Flanger 1,2,3
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,43,00,F7 F0,43,10,4C,02,01,40,43,01,F7 F0,43,10,4C,02,01,40,43,08,F7 |
EFFECT TYPE |
43h 01h: FLANGER 1 43h 02h: FLANGER 2 43h 08h: FLANGER 3 |
FLANGER 1, 2 and 3 add a jet-airplane effect to the sound. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO FREQUENCY | 0.0 - 39.7 (Hz) | view: Table 1 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO PITCH MODULATION DEPTH |
0 - 127 | |
| F0,43,10,4C,02,01,46,00,XX,F7 | 01h - 7Fh (1d - 127d) |
FEEDBACK LEVEL | 1...64...127: -63...0...+63 |
|
| F0,43,10,4C,02,01,48,00,XX,F7 | 00h - 3Fh (0d - 63d) |
DELAY OFFSET | 0.0 - 6.3 (ms) | view: Table 2 |
| F0,43,10,4C,02,01,4C,00,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY | 50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,50,00,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY | 500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,52,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,73,XX,F7 | 04h - 7Ch (4d - 124d) |
LFO PHASE DIFFERENCE (Optional) |
4...64...124: -180...0...+180 (Degree) (Resolution: 3 Degree/Step) |
|
12. Symphonic
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,44,00,F7 |
EFFECT TYPE |
44h 00h: SYMPHONIC |
SYMPHONIC is a multi-phase version of CELESTE which adds modulation and spaciousness to the sound. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO FREQUENCY | 0.0 - 39.7 (Hz) | view: Table 1 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO DEPTH | 0 - 127 | |
| F0,43,10,4C,02,01,46,00,XX,F7 | 00h - 7Fh (0d - 127d) |
DELAY OFFSET | 0.0 - 50.0 (ms) | view: Table 2 |
| F0,43,10,4C,02,01,4C,00,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY | 50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,50,00,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY | 500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,52,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
13. Rotary Speaker
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,45,00,F7 |
EFFECT TYPE |
45h 00h: ROTARY SPEAKER |
A simulation of a rotary speaker. You can use AC1 (assignable controller) etc. to control the speed of rotation. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO FREQUENCY | 0.0 - 39.7 (Hz) | Controllable via MW, BEND, CAT, AC1 or AC2 view: Table 1 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO DEPTH | 0 - 127 | |
| F0,43,10,4C,02,01,4C,00,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY | 50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,50,00,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY | 500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,52,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
|
14. Tremolo
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,46,00,F7 |
EFFECT TYPE |
46h 00h: TREMOLO |
An effect that cyclically modulates the volume. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO FREQUENCY | 0.0 - 39.7 (Hz) | Controllable via MW, BEND, CAT, AC1 or AC2 view: Table 1 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 7Fh (0d - 127d) |
AMP MODULATION DEPTH |
0 - 127 | |
| F0,43,10,4C,02,01,46,00,XX,F7 | 00h - 7Fh (0d - 127d) |
PITCH MODULATION DEPTH |
0 - 127 | |
| F0,43,10,4C,02,01,4C,00,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY | 50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,50,00,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY | 500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,52,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,73,XX,F7 | 04h - 7Ch (4d - 124d) |
LFO PHASE DIFFERENCE (Optional) |
4...64...124: -180...0...+180 (Degree) (Resolution: 3 Degree/Step) |
|
| F0,43,10,4C,02,01,74,XX,F7 | 00h - 01h (0d - 1d) |
INPUT MODE (Optional) |
0: MONO 1: STEREO |
|
15. Auto Pan
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,47,00,F7 |
EFFECT TYPE |
47h 00h: AUTO PAN |
A programm that cyclically moves that sound image to left and right, front and back. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO FREQUENCY | 0.0 - 39.7 (Hz) | Controllable via MW, BEND, CAT, AC1 or AC2 view: Table 1 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LEFT/RIGHT DEPTH | 0 - 127 | |
| F0,43,10,4C,02,01,46,00,XX,F7 | 00h - 7Fh (0d - 127d) |
FRONT/REAR DEPTH | 0 - 127 | |
| F0,43,10,4C,02,01,48,00,XX,F7 | 00h - 05h (0d - 5d) |
PAN DIRECTION | 0: L<->R, 1: L->R, 2: R->L, 3: Lturn, 4: Rturn, 5: L/R |
|
| F0,43,10,4C,02,01,4C,00,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY | 50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,50,00,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY | 500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,52,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN | 52...64...76: -12...0...+12 (dB) |
|
16. Phaser 1,2
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,48,00,F7 F0,43,10,4C,02,01,40,48,08,F7 |
EFFECT TYPE |
48h 00h: PHASER 1 48h 08h: PHASER 2 |
PHASER 1 and 2 cyclically change the phase to add modulation to the sound. PHASER 2 has a stereo input. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO FREQUENCY | 0.0 - 39.7 (Hz) | view: Table 1 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO DEPTH | 0 - 127 | |
| F0,43,10,4C,02,01,46,00,XX,F7 | 00h - 7Fh (0d - 127d) |
PHASE SHIFT OFFSET | 0 - 127 | |
| F0,43,10,4C,02,01,48,00,XX,F7 | 01h - 7Fh (1d - 127d) |
FEEDBACK LEVEL | 1...64...127: -63...0...+63 |
|
| F0,43,10,4C,02,01,4C,00,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY | 50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,50,00,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY | 500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,52,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,70,XX,F7 | 03h - 0Ah (3d - 10d) |
STAGE (Optional) |
PHASER 1: 6 - 10, PHASER 2: 3 - 5 |
Note: Phaser 1 and 2 have different data ranges |
| F0,43,10,4C,02,01,71,XX,F7 | 00h - 01h (0d - 1d) |
DIFFUSION (Optional) |
0: MONO, 1: STEREO |
|
| F0,43,10,4C,02,01,72,XX,F7 | 04h - 7Ch (4d - 124d) |
LFO PHASE DIFFERENCE (Phaser 2 only; Optional) |
4...64...124: -180...0...+180 (Degree) (Resolution: 3 Degree/Step) |
Note: Only available for Phaser 2 |
17. Distortion and Over Drive
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,49,00,F7 F0,43,10,4C,02,01,40,4A,00,F7 |
EFFECT TYPE |
49h 00h: DISTORTION 4Ah 00h: OVER DRIVE |
DISTORTION adds a sharp-edged distortion to the sound. OVER DRIVE adds mild distortion to the sound. |
|
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 7Fh (0d - 127d) |
DRIVE | 0 - 127 | Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY | 50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,46,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,48,00,XX,F7 | 22h - 3Ch (34d - 60d) |
LOW PASS FILTER CUTOFF |
1,000 - 20,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4A,00,XX,F7 | 00h - 7Fh (0d - 127d) |
OUTPUT LEVEL | 0 - 127 | |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 1Ch - 36h (28d - 54d) |
EQ MID FREQUENCY | 500 - 10,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,50,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ MID GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,52,00,XX,F7 | 0Ah - 78h (10d - 120d) |
EQ MID WIDTH | 1,0 - 12,0 | |
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
|
| F0,43,10,4C,02,01,70,XX,F7 | 00h - 7Fh (0d - 127d) |
EDGE (CLIP CURVE) (Optional) |
0 - 127: MILD - SHARP |
|
18. Amp Simulator
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
| F0,43,10,4C,02,01,40,4B,00,F7 | EFFECT TYPE | 4Bh 00h: AMP SIMULATOR | A simulation of a guitar amp. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 7Fh (0d - 127d) |
DRIVE | 0 - 127 | Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 03h (0d - 3d) |
AMP TYPE | 0: OFF, 1: STACK, 2: COMBO, 3: TUBE |
|
| F0,43,10,4C,02,01,46,00,XX,F7 | 22h - 3Ch (34d - 60d) |
LOW PASS FILTER CUTOFF |
1,000 - 20,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,48,00,XX,F7 | 00h - 7Fh (0d - 127d) |
OUTPUT LEVEL | 0 - 127 | |
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
|
| F0,43,10,4C,02,01,70,XX,F7 | 00h - 7Fh (0d - 127d) |
EDGE (CLIP CURVE) (Optional) |
0 - 127: MILD - SHARP |
|
19. 3-Band EQ (Mono)
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,4C,00,F7 |
EFFECT TYPE | 4Ch 00h: 3-BAND EQ (MONO) | A mono EQ with adjustable LOW, MID and HIGH equalizing. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,44,00,XX,F7 | 1Ch - 36h (28d - 54d) |
EQ MID FREQUENCY | 500 - 10,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,46,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ MID GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,48,00,XX,F7 | 0Ah - 78h (10d - 120d) |
EQ MID WIDTH | 10 - 120: 1,0 - 12,0 (Q) |
|
| F0,43,10,4C,02,01,4A,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,4C,00,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY | 50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY | 500 - 16,000 (Hz) | view: Table 3 |
20. 2-Band EQ (Stereo)
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,4D,00,F7 |
EFFECT TYPE | 4Dh 00h: 2-BAND EQ (STEREO) | A stereo EQ with adjustable LOW and HIGH. Ideal for drum Parts. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY | 50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,46,00,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY | 500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,48,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN | 52...64...76: -12...0...+12 (dB) |
|
21. Auto Wah or Pedal Wah
| SysEx String (Hex) | Data Range | Parameter | Description / Range | Available Reference Table |
|
F0,43,10,4C,02,01,40,4E,00,F7 |
EFFECT TYPE |
4Eh 00h: AUTO WAH |
Cyclically modulates the center frequency of a wah filter. With an AC1 etc. this can function as a wah pedal. | |
| F0,43,10,4C,02,01,42,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO FREQUENCY | 0.0 - 39.7 (Hz) | view: Table 1 |
| F0,43,10,4C,02,01,44,00,XX,F7 | 00h - 7Fh (0d - 127d) |
LFO DEPTH | 0 - 127 | |
| F0,43,10,4C,02,01,46,00,XX,F7 | 00h - 7Fh (0d - 127d) |
CUTOFF FREQUENCY OFFSET |
0 - 127 | Controllable via MW, BEND, CAT, AC1 or AC2 |
| F0,43,10,4C,02,01,48,00,XX,F7 | 0Ah - 78h (10d - 120d) |
RESONANCE | 10 - 120: 1,0 - 12,0 (Q) |
|
| F0,43,10,4C,02,01,4C,00,XX,F7 | 08h - 28h (8d - 40d) |
EQ LOW FREQUENCY | 50 - 2,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,4E,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ LOW GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,50,00,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ HIGH FREQUENCY | 500 - 16,000 (Hz) | view: Table 3 |
| F0,43,10,4C,02,01,52,00,XX,F7 | 34h - 4Ch (52d - 76d) |
EQ HIGH GAIN | 52...64...76: -12...0...+12 (dB) |
|
| F0,43,10,4C,02,01,54,00,XX,F7 | 01h - 7Fh (1d - 127d) |
DRY/WET | 1...64...127: Dry(only)...Dry=Wet...Wet(only) |
|
C/O 2002-2012: Werner Ogrodnik (Cologne, Germany)